Don’t suffer from crashes and errors. Fix them with ASR Pro.
Here are some easy ways to fix the Canon-Pixma-MP160-e5 error. An E5 error usually indicates that the PIXMA MP160 does not recognize that one or both cartridges are installed. The PIXMA MP160 requires black and color ink cartridges to be installed in the printer. If the other is missing, error E will be displayed.
How do I fix E05 error on my Canon printer?
Simply wipe the cartridges with a paper towel and place the ink tube back into the holder. If the problem persists, you will need to replace the ink cartridge halfway.
Internet community of technology and medicine enthusiasts. Come to discuss information about articles, computer security, Mac, Linux, business, hardware, networking, games, reviews, accessories, and much more!
Full forum post
If you run into a problem you like, E5 Printer Error, it’s time to solve and fix it. This means the following:
- Unplug the power cord from the outlet.
- Press the power button.
- Input cable, on / off switch remains pressed.
- Tekakan 1x reset button, release the corresponding on / off button, press the design change button again until the screen changes to “0”.
- Press + Johnson to change “0” and “1”.
- Load paper and press the start button on the new printer to print the page.
- Open / lift up the printer (scanner).
- Disconnect withan appropriate power cord.
- Take out cartridge forty-one and close the printer.
- Replace any power cord and press the power button.
- Open the printer (scanner) cover.
- Insert the cartridge in 40 as well as 41.
- If the above steps were performed correctly, the E5 signal will no longer be displayed.
Canon MP160 and MP145 error code and resetting printer settings
1. Turn off the model (the power cord is still plugged in), press and hold
press the STOP
/ RESET button, then press ON or OFF and
2. Keep the ON / OFF button pressed, then press the RESET button
/ 2 times
3. Release all individual
buttons and the printer enters SERVICE MODE
5. When the device finishes charging, press the STOP / RESET button 4 times.
6. Each time you press the STOP /
RESET button, the lights turn on, off or
7. Press ON OFF / 1X,
the number will change toa UN (1)
9. Turn the printer back on.
cartridges are not connected or ink is not supported
E8 = Waste ink container full or possibly waste ink container
E9 = Linked digital camera / camcorder
definitely doesn’t support
E15 = Unable to insert E16 ink cartridge – Often the remaining ink is unknown
E27 = Waste ink absorber
full and waste ink absorber roller full
E42 20 = Scanner Publish Errordisplay
Here’s how to resolve the E5 error message on a Canon Pixma mp140 printer in two different ways.
In some cases, this error occurs when your Canon printer no longer recognizes the ink cartridges installed in it. This could mean that the refill cartridges are not properly attached to the contacts on your printer, or that all of my contacts on the printer and nicotine cartridge are dirty.
If this is your case, skip to the submission below and clean the cartridges and / or friends according to the instructions.yami there. However, keep in mind that these details may or may not solve your problem.
If that doesn’t work, ask your printer to repair your printer’s E5 error. We’ll show you several ways to do this in case one of them doesn’t work for you.
If you still can’t find an easy solution, or if these methods are unlikely to work on your printer, please leave a comment in the section below this article.
The first possible solution to this problem is to repair your Brother printer. Please follow the steps below for this procedure.
Unplug the power cord from the printer first. You need to separate it from both the juice outlet it is connected to and the printer. Be very, very careful to avoid direct contact with electricity.
Then press the Stop / Reset lever on the main control panel of the printer and reconnect the printer power cord while holding it down. The following printout shows what the Stop / Reset button looks like.
This bookThe button is usually located on the right side of the printer control panel and is a dedicated button located second from the right.
What does E05 mean on a Canon printer?
An E05 error usually means the cartridge is likely damaged or the contacts are misleading. All you can try is to clean the contacts on the container and see if it works. Otherwise, you may need to replace the cartridge j directly.
While holding down the stop / reset button, press this dedicated on / off button once. Please do not release the power off / reset button before pressing the power button.
Navigate to the shutdown / reset option and press twice in a row.
The printer should now balance the least number of bits between 30 and 40. Please leave it alone and do nothing with it for this short time.
Now stop and reset the buttons four (4) times in a row with new media. You need to slowly but firmly click the link each time to reach your goal of recovering a specific printer.
Step # 7:
Finally, double-click the button on the printer; I would say that at this point the error message should be gone. If not, see the next possible solution.
Why is my Canon printer flashing E 5 9?
This happens with Canon printers where the paper information set on a Canon corporate printer does not match the paper setting for each printer. In short, when there is an anomaly that affects the paper settings. So, when doing this, you need to make sure that each paper size matches the one set on the Canon printer.
This workaround also recently fixed the E5 error in the printer X Canon Mp140 Pixma. While it is usually very similar to the previous one, it has many types of steps and procedures, plus it resets the printer counters to zero (0). Fortunately, there are a number of error messages that you can still see on your printer by following this similar tutorial.
Remember that everyone will have to reinstall this device as the default device on our computer. Your computer will think it’s a different name and the printer should give it a different name, trying to keep the original name, but appending the whole word “Copy 1” at the end.
Then press the Stop / Reset button frequently. This is the same switch we mentioned in the first software, so it looks exactly the same as the one we included.
Step 3:On off
Now release some kind of stop / reset button and hold down the main on / off button. Make sure the printer light is flashing before pressing the Stop / Reset button twice.
Step for # 6:
How do I bypass Canon printer ink error?
To work around these types of error messages, press and hold the RESUME, STOP / RESET, or COLOR START button on your computer’s printer in the software for 5-15 seconds. The ink monitor turns off, the printer stops blinking, and each printer resumes printing.
Wait for each of our LEDs toturns completely green. Once this happens, press the Stop / Reset icon four (4) more times. This means that the counters need to be reset (0).
Step # 7:
Now unplug the entire power cord from the printer. Can I unplug it both from the outlet and from the printer itself?
Step # 8:
Finally, plug the power cord back into the printer and turn on the thought.
Everything should work fine. If not, contact users via the comment in the section below this article.
. You might be interested in Canon Mp140 pixma manual.
Click above to download the Spanish version
Cómo Reparar El Error Mp160 E5 De Canon Pixma Fácilmente
Como Corrigir O Erro MP160 E5 Da Canon Pixma Facilmente
Come Correggere Facilmente L’errore Canon Pixma Mp160 E5
Hur Man Enkelt Fixar Canon Pixma-fel Mp160 E5
Hoe Canon Pixma-fout Mp160 E5 Eenvoudig Op Te Lossen
Canon Pixma 오류 Mp160 E5를 쉽게 수정하는 방법
Как легко исправить ошибку Canon Pixma Mp160 E5
So Beheben Sie Den Canon Pixma-Fehler Mp160 E5 Einfach